Audiovox WIRELESS HANDSET WITH GPS CDM-8300 - Manual (Page 7)

C
H
1
1 Plug the desktop charger into a standard outlet.
BATTERY CHARGING
POWER CONNECTION
11
C
H
1
BATTERY INSTALLATION
1 u
Place the battery on the back of the handset
and slide into place.
v
Push the battery down
until it locks into place.
BATTERY REMOVAL
1 u
Pull down the release latch, lift up the
battery and
v
remove the battery from the
handset.
Make sure the battery is securely placed to avoid silpping
off during a call.
10
u v
u
v
1 Place the handset (with battery attached) into
the charger.
CHARGING THE BATTERY WITH THE HANDSET
• It is more efficient to charge the battery with the phone
turned off.
• If the red LED does not illuminate when charging, check
the power connection and make sure the handset is
securely in place.
BATTERY USAGE BATTERY USAGE
l The red LED indicates charging is in progress.
l The green LED indicates charging is completed.
Fully charge the battery before using – it is not charged when
purchased.
u
v