Hudson Valley Lighting RANDOLPH 2621-2623 - Manual (Page 2)

7. Connect the black fixture wires to the black wire in the outlet box.
Fasten the joined wires as in step 6.
8. Using the end balls, fasten the fixture to the outlet box. Rotate and align the
canopy as necessary.
9. Remove the ring from the threaded socket. Place the glass over the socket and
reinstall the ring.
10. Place the metal trim ring and round glass diffuser (if used) on the bottom of the
glass and secure with the 3 knurled head screws.
11. Install the lamp (light bulbs).
NOTE: The 2621 is rated for 100 watt type A lamp
The 2622 and 2623 are rated for a 150 watt type A lamp.
DO NOT EXCEED RECOMMENDED WATTAGE !
11. Restore power to circuit at breaker or fuse box.