Hydrotech C, C PLUS, A PLUS, E, E-DC and E PLUS Series PULSAtron User Manual
Page 3
1.0
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
1.1 GENERAL SAFETY CONSIDERATIONS
•
Always wear protective clothing including gloves and safety goggles when
working on or near chemical metering pumps.
•
Inspect tubing regularly when replenishing chemical solution for cracking or
deterioration and replace as necessary. (Always wear protective clothing and
safety glasses when inspecting tubing.)
•
When pump is exposed to direct sunlight use U.V. resistant tubing.
•
Follow directions and warnings provided with the chemicals from the chemical
manufacturer. User is responsible for determining chemical compatibility with
chemical feed pump.
•
Secure chemicals and metering pumps, making them inaccessible to children and
pets.
•
Make sure the voltage on the chemical metering pump matches the voltage at the
installation site.
•
Do not cut plug or the ground lug off of the electrical cord – consult a licensed
electrician for proper installation.
•
Pump is NOT to be used to handle flammable liquids.
1.2 SAFETY OPERATING PROCEDURES
Each Electronic Metering Pump has been tested to meet prescribed specifications and
safety standards.
Proper care in handling, installation and operation will help in ensuring a trouble free
installation.
3
When using chemical feed pumps, basic safety pre-
cautions should always be followed to reduce risk of
fire, electric shock, and personal injury. Failure to
follow these instructions could result in death or
serious injury.