Software installation – CAME RBM21 User Manual
Page 11
[
11
]
ENGLISH
3.1
1
2
3
4
1
1
1
Fig. 1
Insert the 1st floppy disk (or the Cd-Rom) into
the dedicated drive; click on START in the Windows
toolbar, select RUN and enter
A:\SETUP
(with the Cd-Rom, replace
the
A
with the letter of your CD drive);
confirm the operation by clicking on
OK.
For operation in On Line mode (via PC) only, it is necessary to install the software (floppy disk
or Cd-Rom) included in the Rbm21 package; once installed, read the “Guide to Rbm21 on-line
programming” available with the software (in .pdf file) to programme the system.
An “installation completed” window will appear at the end of the procedure to confirm the end of the
operation: click on OK and restart the computer to apply the new settings.
Fig. 2
A window that will update some
system files will appear. If you are using
floppy disks, you will be asked to insert the
following disks: insert them and confirm with
OK.
Fig. 3
Close all the programmes that are open and
click on OK to proceed.
Fig. 4
By carrying on to the next window
you can choose where to instal the program
by clicking on "Change Directory", or click
on the icon for the default installation
(C:\PROGRAMS\RBM21).
Software Installation