Cashco SA5 - Manual (Page 6)

IOM-CA5/SA5 6
NOTE: If fl ang es do not come to geth er equal ly,
the upper di a phragm pres sure plate (8) may
be off-center. Remove spring cham ber (4) and
reposition upper di a phragm pres sure plate
(8) until the spring chamber (4) comes down
evenly on all sides.
11. Install all fl ange bolts (12) and nuts (11) with
nameplate (99) located under one bolt head.
Hand-tighten nuts (11).
12. Evenly tighten body bolting (11,12) using an
alternating cross pattern in one revolution
increments. Tighten all bolts to 30-35 Ft-lbs
(41-47 Nm).