Clear-Com Concert for Newsroom - Manual (Page 24)

24 Administrator Guide
To remove the channel configuration:
1. Disconnect the channel by clicking the Connecting status [ ] or Connected status icon
[ ].
2. The Action buttons change to [modify] and [remove]. Click [remove].
4.5 Eclipse Frame
Node > [Node name] > Eclipse Frame [ ] displays the Eclipse Frame page in the right-hand pane.
The table displays the hostname and a brief description of each Eclipse Frame.
Eclipse is the Clear-Com digital matrix intercom system.
Note:
You must use ECS (Eclipse Configuration System), the Eclipse management tool, to add Concert users
to ports on an IVC-32 card installed within the Eclipse Frame.
When a Concert user is configured for Eclipse through ECS, the Eclipse Frame is automatically added to
the Concert database (within the first Node of the navigation tree). See Adding Concert user accounts
to an Eclipse Frame.
4.5.1 Adding and removing an Eclipse Frame
Note:
It is recommended to only use ECS to Eclipse enable Concert users which will automatically create the
Eclipse Frame and copy Eclipse user credentials to the Concert database.
To add an Eclipse Frame using the CMI (not recommended):
1. In the Eclipse hostname field, type the hostname of the Eclipse Frame in the following format:
[hostname]:[port]
2. Optional: In the Description field, type a brief description of the Eclipse Frame
(for example, Eclipse Frame 1).
3. Click [add].
To remove an Eclipse Frame:
1. Locate the Eclipse Frame that you want to remove in the list. In Action, click [remove].
2. A message is displayed [ ] asking if you want to remove the Eclipse Frame. Click OK.