Clear-Com Concert for Newsroom - Manual (Page 35)

35 Concert Client User Guide for Mac
1. Click the conference key. The key changes to active mode [ ].
2. To leave the conference, click the red ( ‘X’) segment of the conference key.
To join a conference with Talk-only permissions [ ]:
1. Click the conference key. The key changes to active mode [ ].
2. To leave the conference, click the red ( ‘X’) segment of the conference key.
3.3.4 Calling (joining) a channel
A channel represents a potential connection with a hardware port on the PC, to which an audio device
(such as a public address (PA) system, program feed, or additional intercom system) is connected.
To call (join) a channel with both Listen and Talk permissions [ ]:
1. To call (join) the channel in:

Listen-only mode, click the green segment of the channel key.

Talk-only mode, click the red segment of the channel key.

Talk and Listen mode, click the green and then the red segments of
the channel key.
2. To end the connection with the channel, click the channel key.
To call (join) a channel with Listen-only permissions [ ]:
1. Click the channel key.
2. To end the connection with the channel, click the channel key again.
To join a conference with Talk-only permissions [ ]:
1. Click the channel key.
2. To end the connection with the channel, click the channel key again.
3.3.5 Joining an audio feed
The Audio Feed facility [ ] enables you to monitor a continuous audio source (a listen-only
program feed) within Concert. The Audio Feed facility is available from both the Client console and
the Intercom Panel.
For more information about joining an audio feed, see 2.7 Joining an audio feed.