Hach-Lange HQ Series Portable Meters - Manual (Page 4)

HACH COMPANY
WORLD HEADQUARTERS
Telephone: (970) 669-3050
FAX: (970) 669-2932 FOR TECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:
Call 800-227-4224
Contact the HACH office or distributor serving you.
www.hach.com [email protected]
In the U.S.A. –
Outside the U.S.A. –
On the Worldwide Web –
; E-mail –
toll-free
USB Installation and Operation
5. The display will show “Sending Data” to indicate the data is
being sent to the printer.
Important Note: Do not disconnect the printer cable while the
"Sending Data" screen is displayed, or the meter may lock up.
Sending data to a computer
1. Load the HQd PC Application Software supplied with the
HQd meter onto a PC.
2. Turn off the meter, connect the HQd meter to an electrical
outlet using the USB/DC power adapter and then turn on
the meter.
3. Connect a USB cable (Cat. No. 59240-00) to the host USB
connector on the USB/DC adapter and to the computer.
4. Open the HQd PC Application Software on the PC. Click the
green triangle shown in the menu bar to initiate a connection.
5. Press the DATA LOG key on the HQd meter.
6. Use the UP and DOWN keys to highlight Send Data Log.
Press the GREEN/RIGHT key under Select.
7. The meter display will show “Sending Data”. The data will
appear in the PC Application Software window. The file is
saved in Comma Separated Values (.csv) file format.
Note: For more information on working with CSV files, refer to the
Working with Data section of the HQd PC Application Software CD.
For more information on viewing data log reports, see Archiving
and Exchanging Methods in the HQ Series Portable Meters user
manual (Cat. No. HQ40d18).
USB - Host
© Hach Company, 2006. All rights reserved. Printed in the U.S.A.