Audiovox FR548-2CH - Manual (Page 9)

128-6282
9 of 20
The Battery Charging Adapter Kit consists of an AC Wall Adapter/Charging Trans-
former and a Desk-Top Charging Stand; it can be used only if the FRS radio is
equipped with four rechargeable 1.2 Volt, 650mAh Audiovox Nickel Metal hydride
rechargable batteries (P/N: SBAC01).
WHEN TO USE THE CHARGING ADAPTER KIT
Charging the FR548-2CH:
Insert the charging transformer into a household electrical outlet and connect its
power jack to the PWR socket on the rear of the charging stand. Simply placing
the unit into the charging stand will begin the charging process. The red LED on
the front of the charging transformer serves as a charge indicator. The charging
stand will charge two units simultaneously. Approximately 12 – 16 hours are
required to fully charge the batteries. Remember to turn your FR548-2CH OFF
before placing it into the charging stand.
CAUTION:The charging stand in your kit is intended for use with the
supplied batteries. Do not attempt to recharge any other
batteries with the charging stand.
-9-
PWR AUDIO OX
LISTED
81J1
E81356 UL
R
AC WALL
ADAPTER/
CHARGING
TRANSFORMER
MODEL DV-1210T
INPUT: 110VAC
OUTPUT: 12VDC
DESKTOP CHARGING STAND
PART NUMBER FR548-2CH
CHARGING STAND
PWR JACK
ADAPTER
POWER
PLUG
FRS RADIO CHARGING
COMPARTMENTS (2)