Alcatel Carrier Internetworking Solutions One Touch 835 - Manual (Page 12)

22
• Making a second call
To call a second party during a call, press the left softkey “Options” and select “Second call”.
3.5 Conference calls (1)
Your phone allows you to talk to several people at the same time. When on a double call: press the left
softkey for “Options”, select “Conference” then confirm with the
key.
If a third call comes in, answer it by pressing the key and speak with your new correspondent.
This correspondent becomes a member of the conference if you press the left softkey for “Options”, select
“Add conf.”, and then confirm by pressing
. Pressing disconnects the current call.
To end the conference call, press the left softkey for “Options”and select “End conf.”.
3.6 Double line (ALS) (1)
Your SIM card can contain two different telephone numbers. Under “Tools”, choose “Double line (ALS)”
and then select a default line; all your outgoing calls will be made from this number. Incoming calls, however,
will continue to use the two lines (see page 58).
22
(1) Contact your network operator to check service availability.
The number of the calling party is displayed if transmitted by your network and if the service is
subscribed. However, if the number has been stored in your directory, the caller’s name will be
displayed.
3.4 During the call
Available functions
You can access the following options during a call by pressing the left softkey (“Options”):
21
Directory • Access the directory.
Messages • Access your messages.
Call Memo • Record your current call.
Second call • Place a second call.
Put call • Put the current call on hold.
on hold
Mute • Mute the microphone.
Handsfree • Activate the handsfree mode.
Hang up • End the current call.
Volume • Adjust the volume.
Adjusting the volume
You can adjust the sound level during a call using the key.
Handling two calls
• Call waiting (1)
If a second call comes in while you are already on line, you will be notified by a tone.You can then accept
the call by pressing the
key.
Your current call will be automatically put on hold.You can then swap between your two correspondents
using the left softkey “Options” then select “Swap call”.
(1) Contact your network operator to check service availability.
OH5_02_UM_GB_25-06-04 30/08/04 15:43 Page 21