Hach-Lange E300 Electrode stand - Manual (Page 2)

HACH COMPANY
WORLD HEADQUARTERS
Telephone: (970) 669-3050
FAX: (970) 669-2932 FOR TECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:
Call 800-227-4224
Contact the HACH office or distributor serving you.
www.hach.com [email protected]
In the U.S.A. –
Outside the U.S.A. –
On the Worldwide Web –
; E-mail –
toll-free
Electrode stand E300
3. Reseat the circlip in the groove ( Figure 2 , item 4 ).
The E300 is now ready for mounting the Electrodes.
4. Push one of the clips ( Figure 2 , item 6 ) upon the probe body up to the ridge.
5. Put the clip in one of the open places in the holder head ( Figure 2 , item 7 ) and click it in to
fix the probe.
6. Pressing against the lower end of the clip detaches the clip ( Figure 2 , item 8 ).
Note: After mounting the electrodes, the friction screw ( Figure 1 on page 1 , item 2 ) must be adjusted so
the arm ( Figure 1 on page 1 , item 3 ) can stay in any position.
Figure 2 Installation electrode stand E300
1 Pivot 5 Base (bottom view)
2 Circlip 6 Clip
3 Base 7 Open places in the holder head
4 Groove 8 Clip (bottom view)
© Hach Company, 2006 Edition 1, Nov 2006 bb/sk