Hach-Lange TOC-X5 shaker - Manual (Page 28)

English 28
Use of hazard information
Precautionary labels
Read all labels and tags attached to the instrument. Personal injury or damage to the instrument
could occur if not observed. A symbol on the instrument is referenced in the manual with a
precautionary statement.
Product overview
The TOC-X5 shaker is used in laboratories to expel total inorganic carbon (with the TOC cuvette
tests LCK 385 / 386 / 387). The vibration unit can shake up to 8 vials simultaneously. The ports are
labeled 1-8. The cycle time of a shaking process is 5 minutes. Refer to
Figure 1 .
D A N G E R
Indicates a potentially or imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WA R N I N G
Indicates a potentially or imminently hazardous situation which, if not avoided, could result
in death or serious injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate injury.
N O T I C E
Indicates a situation which, if not avoided, may cause damage to the instrument. Information
that requires special emphasis.
This is the safety alert symbol. Obey all safety messages that follow this symbol to avoid potential
injury. If on the instrument, refer to the instruction manual for operation or safety information.
Electrical equipment marked with this symbol may not be disposed of in European public disposal
systems after 12 August of 2005. In conformity with European local and national regulations (EU
Directive 2002/96/EC), European electrical equipment users must now return old or end-of life
equipment to the Producer for disposal at no charge to the user.
Note: For return for recycling, please contact the equipment producer or supplier for
instructions on how to return end-of-life equipment, producer-supplied electrical
accessories, and all auxiliary items for proper disposal.