Hach-Lange 2100 AN Laboratory Turbidimeter Basic User Manual - Manual (Page 7)

Figure 2 Back overview
1 Power cord connector 5 Air purge fitting
2 Fuse holder 6 Recorder output jack for a chart
recorder (0 to 1 V output)
3 Power switch 7 Remote cable jack for flow valve
module connection to the automatic
flow cell (low pressure)
4 DB9 connector for RS232 cable 8 Lamp access cover
Product components
Refer to Figure 3 to make sure that all components have been received.
If any of these items are missing or damaged, contact the manufacturer
or a sales representative immediately.
Figure 3 Instrument components
1 2100AN turbidimeter 7 StablCal ® Calibration kit
2 USEPA filter assembly 8 Gelex ® secondary turbidity
standardization kit 1
3 455 nm filter assembly 9 Dust cover
4 Oiling cloth 10 Printer paper roll (2x) 2
5 Six 1" sample cells (30 mL) with
caps
11 Power cord
6 Silicone oil
1 Supplied with 4700100 only.
2 Do not remove the plastic wrapper from the paper rolls until the paper is
installed.
English 7