INSTEON SmartLinc (2412N) Manual - Manual (Page 11)

11
®
Rev. 6/19/2012 11:45 AM
Adding and Controlling a Thermostat from SmartLinc
1. Write down your thermostat’s INSTEON I.D. (located on the back near the label). If using a
Thermostat Adapter, unplug from thermostat to find the number, then plug back in.
2. Log onto http://smartlinc.smarthome.com and click the Room Settings icon (cube with a wrench).
3. If you haven’t already, create a room called “Thermostat” in the 16th room slot (bottom right).
If you have an INSTEON Thermostat (2441TH), INSTEON-compatible Venstar thermostat (2491T)
or INSTEON Totaline/Venstar Thermostat Adapter (2441V), you can add your thermostat and adjust
temperatures and modes from the SmartLinc interface. Note that you must add the thermostat in its
own room in the 16th (bottom right) room slot.
(See Adding/Naming Rooms in SmartLinc.)
4. Click Thermostat scene.
5. Type the INSTEON I.D. you wrote down in
step 1 into the text field nex to Save New ID,
then click Save New ID.
6. Wait while SmartLinc automatically finds and
synchronizes with your thermostat.
7. Use the drop-down menus to change
thermostat mode, fan mode and heat and
cool setpoints.