INSTEON Hub - 2242-222 (US), 2242-422 (EU), 2242-442 (UK), 2242-522 (AUS/NZ) Manual - Manual (Page 16)

Page 16 of 26 Rev: 9/27/2013 4:17 PM
4) Tap Done
5) Next select Off Time and select
Time of Day
Or
Sunrise/Sunset
6) Tap Done
7) Select the days that you would like the timer to run by tapping on each day. By default,
the entire week is pre-selected for you.
8) When finished tap Save to save your new schedule
Scenes
Scenes are a collection of INSTEON devices that can each turn on, off or dim when activated from either the app, a
schedule or by activation from any other controller (motion sensor, keypad, switch, etc.)
Note: some older INSTEON devices may require manually tapping of the set button during scene configuration. See
Scene Troubleshooting for more info.
Add a Scene
1) From the Scene page, tap Add
2) Give the new Scene a name, icon and room associations
3) Tap each device that you’d like to add to the scene, when finished tap the Next button.
4) The next page will display the list of your scene members broken up by room and will look something like this:
Member Type Member Response