INTELLINET NETWORK 524148 24-Port Gigabit Ethernet Rackmount Switch User Manual - Manual (Page 4)

front panEl
lEDs
rEar panEl
power
Power to the Gigabit Ethernet Rackmount Switch is supplied by plugging
the included power
cable into the socket
to the right of the on/
off switch on the rear
panel.

LED Status Operation
Power On Unit is receiving power.
Off Unit is not receiving power.
LINK/ACT On Corresponding port is connected.
Off Corresponding port is not connected.
Flashing Corresponding port is transmitting/receiving data.
1000M On Port is transmitting/receiving data at 1000 Mbps.
Off Port is transmitting/receiving data at 10 or 100
Mbps.
Shown: Model 524148, 16-Port