INTELLINET NETWORK 560801 24-Port Gigabit Managed Switch + 4 SFP Ports User Manual - Manual (Page 78)

Web Managed GbE Switch
78
The following table describes the labels in this screen.
LABEL DESCRIPTION
Port Select the number of the port for which you want to assign IEEE 802.1p
priority to incoming frames.
Queue ID
Select the Queue ID for configuration it’s weighted. The Queue ID range
is 1 to 8.
Weight Configure the queue scheduling weight of specified ports. Range is valid
as following:
 0: means the queue is strict mode.
 1-127: means the queue weight of the scheduling.
Apply
Click Apply to save your changes to the switch.
Weight This field displays the weight of the queue.
3.6.7 Queue Remarking Status
Click QoS > Queue Remarking Status to display the screen shown below.