intimus Crusher 1000 - Manual (Page 5)

5
GB
1000
TECHNICAL DATA
FUNCTION DESCRIPTION
Power Supply: 220-240V/50 or 60 Hz
Please check the power configuration label located on the back of the crusher.
Power Consumption: ca. 5 A / 230V
Cycle Time Full Cycle: 20 seconds
Cycle Time Destroy Cycle: 10 seconds
Capacity: 2.5“ and 3.5“ hard Drives.
Disk drives up to 1.66“ high.
Two 1” high standard hard disk drives.
Up to six laptop hard disk drives.
Operating Environment: 5°C - 40°C (41°F - 104°F),
Humidity: 10 to 80% (Non Condensing)
Physical Weight Crusher: Net 37.25 kg (82 lbs.)
Physical Weight Case: 10.45 kg (23 lbs.)
Shipping Weight: 56.8 kg (125 lbs.)
Physical Dimensions Crusher: 400 mm (15.75 in.) (L) x 180 mm (7.1 in.) (W) x 358 mm (14.1 in.) (H)
Physical Dimensions Case: 533 mm (21 in.) (L) x 635 mm (25 in.) (W) x 305 mm (12 in.) (H)
Shipping Dimensions: 863 mm (34 in.) (L) x 660 mm (26 in.) (W) x 457 mm (18 in.) (H)
Warranty: 1 Year Parts and Labor Limited Warranty
Duty Cycle: Continuous*
* Ambient temperatures above 75 degrees F will have an effect on duty cycle.
FRONT PANEL DESCRIPTION
1 = Power Switch
Applies power to the crusher.
2 = Destroy Button
Initiates the destruction function.
Note: When pressed initially with the wedge
in the home position and in Auto Mode, the
crusher will first Auto-size requiring a second
push of the “Destroy” button.
3 = Size Button
Toggles between Auto-Mode and Manual
Mode when held down for three seconds or
when Green, Yellow and Blue lights flash in
a chasing sequence. In Auto Mode, initiates
the Auto-Size function. In Manual Mode
each button press moves the destruction
wedge down one of four sections.
4 = Blue Lamp
Illuminates when the wedge is moving down
during Destruction function.
5 = Yellow Lamp – Auto Mode
Solid – Indicates Auto-Size function is
running.
Flashing – Door is open and no media
detected.
Yellow Lamp – Manual Mode
Solid – Indicates destruction wedge is
moving to new position.
6 = Green Lamp – Auto Mode
Solid – Indicates ready, the door is
closed, media is detected.
Flashing – Indicates the door is open and
media is detected.
Green Lamp – Manual Mode
Solid – Indicates ready, the door is
closed.
Flashing – Indicates the door is open.
7 = Front Door
Prevents access to the HDD and Destruction
wedge during the destruction process. If
opened during the destruction process the
destruction wedge will automatically stop.
INSIDE COMPONENT DESCRIPTION
8 = Door Handle (Door)
Prevents access to the hard drives and
Destruction Wedge during the destruction
process. If opened during the destruction
process the destruction wedge will
automatically stop. When the door is
closed, the destruction wedge will retract.
9 = Destruction Wedge
The Destruction Wedge pushes down on
the hard drive(s) bending and breaking
the external and internal components,
rendering the hard drive inoperable.
10 = Hard Drives
Image shows the proper location of two 1”
hard drives stacked on top of each other.
Note: Hard drives are centered between
the two Support Rails.
11 = Support Rails
Supports and aligns the hard drive(s).
12 = Debris Tray
Removable tray helps collect hard drive
debris caused by the destruction process.
The Debris Tray can be easily lifted out
and emptied.
6 5 4 1
2 3
7
8
9
10
11
12
11
Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung