IQinVision IQanalytics - Manual (Page 7)

7
A. Enable: This will enable Camera Tamper Detection.
Ignore Area Settings
Enabling the ‘ignore area’ allows the engine to ignore processing in areas that
don’t require it. This may include the ceiling, moving light sources, environmental
conditions, or areas where no activity is expected. This allows processing to be
reduced and lowers false alarms.
A. Enable: will enable the ‘ignore area’.
B. Brush: allows area selection painting to use a larger 3x3 area.
To select an area to ignore, click and drag on the image to paint the scene. The area
highlighted in red will be the ignored. Click and drag on the red area to de-select that
section of the grid.
Advanced Settings
C. Processing Quality: Select the Processing Quality type from the drop down box
depending upon scene. The higher quality allows for detecting smaller objects,
however overall accuracy may be reduced as frame rate will be decreased due to
additional processing power requirements.
The choices are:
i. Low (Default Recommended)
ii. Medium
iii. High
iv. Original
Learning Settings
The learning settings effect how IQanalytics learns the background over time. Fine-
tuning these parameters will help in reducing false detections due to scene or
environmental changes.
D. Object Learning: Enable this feature to “learn” stationary objects into the
background.
E. Object Learn Time: The time in seconds a stationary object is in the scene before
IQanalytics will “learn” the object into the background.