If using another means of chlorine, How to replace the aqua smartae plus components, How to replace the aqua smarte plus™ components – King Technology Aqua Smarte Plus Mineral Activator User Manual

Page 3

Advertising
background image

Open cap. If
using MizerMax
Pac stand back
to avoid inhaling
fumes.

If using another means of chlorine -

Follow steps 1-5 on Start-up and Operation and then continue below.

Maintain setting of Maximum, Setting 5 or ON
depending on the model. No adjustments needed.

Maintain a minimum chlorine reading of 0.5 ppm
with a chlorine delivery device or hand feeding.

6.

7.

3

Shock pool every two weeks
or as needed to maintain
water quality. Follow label
directions on the shock
treatment used.

Shock pool every two weeks or
as needed to maintain water
quality. Follow label directions
on the shock treatment used.

Remember to adjust dial by 1/2 increments only,
in order to prevent over chlorination which may
bleach pool surfaces.

For the first week test the pool
water daily for free chlorine
with Aqua Smarte Brand Test
Strips to ensure correct dial
setting. Continue to test weekly
throughout the season.

After testing, adjust the dial up by 1/2 increment
if the free chlorine reading has dropped below 0.5
ppm or down by 1/2 increment if the reading has
risen above 1.0 ppm. Continue this process each
day until the color on the test strip matches the
ideal Aqua Smarte range of 0.5 ppm to 1.0 ppm
chlorine.

8.

9.

8.

Do not add shock in or near the skimmer or into the
Aqua Smarte Plus Docking Station or Aqua Smarte
Cycler as it could damage equipment, risk potential
explosion or discolor your pool surface.

Do not add shock in or near the skimmer or into the
Aqua Smarte Plus Docking Station or Aqua Smarte
Cycler as it could damage equipment, risk potential
explosion or discolor your pool surface.

WARNING

WARNING

The Mineral Activator will fit Aqua Smarte Plus
Docking Station Model 7700 and Aqua Smarte
Cycler Models 5700 or 6700.

Find slot on
side of Mineral
Activator and
line up with
fin inside
the Docking
Station or
Cycler. Lower
Mineral
Activator until
secure.

USE ONLY the factory recommended Aqua Smarte
Plus replacement products. DO NOT USE bulk
chemical tablets in the Aqua Smarte Plus Docking
Station or Aqua Smarte Cycler or put anything
inside the Docking Station or Cycler other than
the appropriate Aqua Smarte Plus product as
directed in the product instructions. Warranty will
be void if the correct Aqua Smarte Plus products
are not used.

Turn off pump and turn dial to Pac Removal,
Setting 0 or OFF depending on the model.

CAUTION read carefully.

Replacing Mineral Activator

THE MINERAL ACTIVATOR MUST BE REPLACED
EVERY 6 MONTHS OR AFTER ONE POOL SEASON,
WHICHEVER IS SHORTER.

IMPORTANT:

Remove and
read the inserted
information card.

How To Replace the Aqua Smarte Plus™ Components.

SLOT IN
MINERAL
ACTIVATOR

FIN INSIDE
OF DOCKING
STATION

Pac

Removal

1.

2.

3.

4.

5.

Mark your calendar for the six month replacement of the Mineral Activator and approximate replacement
times for the MizerMax Pac. Once wetted, the time-released mineral coating of this product is effective
up to 6 consecutive months or one pool season whichever is shorter. After that time even if you hear the
spent media inside it is no longer effective and must be replaced.

6.

Advertising