King Technology Aqua Smarte Plus Pool Asleep - Manual (Page 2)

7. Replace cap on Aqua
Smarte or Aqua Smarte
Plus System and allow
circulation to run at least
15 minutes before insert-
ing any other Aqua Smarte
Plus pac products.
Before lowering the water level and discard-
ing the used Aqua Smarte Plus Mineral
Activator, insert Aqua Smarte Plus Shine
using steps 1 through 8.
1. With the circulation
system off, set control
dial to lowest setting and
remove the cap to the
Aqua Smarte or Aqua
Smarte Plus System.
COLORED
CAPS
2. Remove caps from Aqua
Smarte Plus Shine with a
pliers or other suitable tool.
3. Turn Aqua Smarte Plus
Shine over so open ends
face down and insert into
the center of the Aqua
Smarte Plus Mineral
Activator. The ends of the
pac will align with an
L-shaped key in the
system. DO NOT FORCE.
4
4. Replace cap on Aqua
Smarte or Aqua Smarte
Plus System and set dial to
Setting 5.
5. Turn on pump and allow
1 hour for the product to
slowly dispense into the
pool. If after 1 hour, the pac
still contains some ingredi-
ent, re-insert, replace cap
and run the circulation for
an additional 30 minutes.
All components are recyclable when finished dispensing.
6. Remove the empty Aqua
Smarte Plus Shine and
discard or recycle.
1. Aqua Smarte Plus Shine™
SHINE “
Eliminates Contaminants for
Crystal Clear Water
SHINE ™
Eliminate s Contam inants for
Crystal C lear Wa ter
SHINE ™
Eliminates Contaminants for Crystal Clear Water
WE RECYCLE
2 3
7. Replace cap on Aqua
Smarte or Aqua Smarte
Plus System and allow
circulation to run at least
15 minutes before insert-
ing any other Aqua Smarte
Plus pac products.
Before lowering the water level and discard-
ing the used Aqua Smarte Plus Mineral
Activator, insert Aqua Smarte Plus Shine
using steps 1 through 8.
1. With the circulation
system off, set control
dial to lowest setting and
remove the cap to the
Aqua Smarte or Aqua
Smarte Plus System.
COLORED
CAPS
2. Remove caps from Aqua
Smarte Plus Shine with a
pliers or other suitable tool.
3. Turn Aqua Smarte Plus
Shine over so open ends
face down and insert into
the center of the Aqua
Smarte Plus Mineral
Activator. The ends of the
pac will align with an
L-shaped key in the
system. DO NOT FORCE.
4
4. Replace cap on Aqua
Smarte or Aqua Smarte
Plus System and set dial to
Setting 5.
5. Turn on pump and allow
1 hour for the product to
slowly dispense into the
pool. If after 1 hour, the pac
still contains some ingredi-
ent, re-insert, replace cap
and run the circulation for
an additional 30 minutes.
All components are recyclable when finished dispensing.
6. Remove the empty Aqua
Smarte Plus Shine and
discard or recycle.
1. Aqua Smarte Plus Shine™
SHINE “
Eliminates Contaminants for
Crystal Clear Water
SHINE ™
Eliminate s Contam inants for
Crystal C lear Wa ter
SHINE ™ Eliminates Contaminants for Crystal Clear Water
WE RECYCLE
2 3
1
HOUR
1
HOUR
8. Repeat steps 1-7 if
additional Aqua Smarte
Plus Shine is required.
8. Repeat steps 1-7 if
additional Aqua Smarte
Plus Shine is required.