KT&C ACE-EDR380NU - Manual

Control Function
M092-EDR380-001
HIGH RESOLUTION
WDR COLOR MODULE CAMERA
OPERATION MANUAL
Thank you for choosing our high quality camera.
Before attempting to connect or operate, please read and
follow these instructions.
CAUTIONS
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature, indicate that
it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
This product should not be mixed with other commercial wastes
purchased this product, or their local government office, for details
of where and how they can take item for environmentally safe
recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract.
Household users should contact either the retailer where they for
disposal.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER(OR BACK). NO USER.
SERVICING TO QUALIFED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient mangnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in
the literature accompanying the appliance.
FEATURES
• 1/3 960H SONY Double Scan Super HAD CCD II
• High Resolution of 700TV Lines
• WDR (Wide Dynamic Range)
• OSD Function
• Multi Language
(English / Chinese / Russian / Spanish / German)
• Digital slow shutter
• 3DNR
• Privacy Zone 15Zone
• 3x Digital Zoom
• Motion Detect, Face Detection
• Only DC12V
• RS-232C TTL Level Interface(RS-485 Option)
• A/D Remote Controller > Option
CONNECTION DIMENSIONS
Unit(mm)
CAUTIONS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note -
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.”
WARNING -
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
Caution -
Any changes or modifications in construction of this devies which
are not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
CAUTION
1. A regulated DC12V 300mA power supply is recommended for use with
this camera for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera.
When unregulated power supply is applied, product warranty will be
out of subject.
2. It is recommended that the camera is used with a monitor that has a
CCTV quality 75 video impedance level. If your monitor is switched to high
impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal
componets. Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reflective light,
which may cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.
CONNECTION
How WDR makes better image?
WDR allows every detail to be captured accurately even
if one portion is bright while other portions are dark.
Option(Lens.A/D Remocom)
Lens Type
Pin Hole
Board
Varlfocal
C/CS Mount
Function
SW1 : MENU OSD Menu on/off
SW2 : UP OSD Menu up
SW3 : DOWN OSD Menu down
SW4 : LEFT OSD Menu left
SW5 : RIGHT OSD Menu right
Option
2-5.0
29.8
13.6
38
38
- TOP VIEW -
- BOTTOM VIEW -
UP
DOWN
RIGHT LEFT
MENU
J103 J105
SENSOR
J508 J507 J506
Top Connector Position
Bottom Connector Position
1) J103(DC IRIS)
PIN NO. NAME I/O
1 DAMP + O
2 DAMP - O
3 DRV + O
4 GND -
2) J105(IR CUT)
PIN NO. NAME I/O
1 IR CUT OUT + O
2 IR CUT OUT - O
4) J507(DN_I/O)
PIN NO. NAME I/O
1 +12V O
2 GND -
3 COLOR/BW IN I
4 COLOR/BW OUT O
3) J506(DC IRIS)
PIN NO. NAME I/O
1 DAMP + O
2 DAMP - O
3 DRV + O
4 GND -
5) J508(DN_I/O)
PIN NO. NAME I/O
1 GND -
2 VIDEO O
3 GND -
4 +12V I
5 RXD(TRX-) I/O
6 TXD(TRX+) I/O
7 A/D KEY1 I
8 MOTION O
9 COLOR/BW IN I
10 GND -
COLOR/BW IN Application
RS232C TTL LEVEL
HIGH : +3.3V
LOW : GND
OPEN: NIGHT MODE
GND: DAY MODE
Color/BW IN
Color/BW IN