AVE Time-Date-Character-Title TDCT-Pro - Manual (Page 7)

7
PROGRAMMING CONT.
By selecting the Set Address between 0 to 254 make TDCT-Pro
to act as a slave and that make TDCT-Pro ready to receive
command from the master. Selecting “ANY” will make TDCT-Pro
as a stand-alone unit. Selecting “MSTR” make the TDCT-Pro to
act as a master. TDCT-Pro can sense all the slaves by pressing
the reset button and synchronize the time of slaves TDCT-Pros
connected with it. Appendix 1 illustrates the connection informa-
tion between master and salve.
3.4 Time & Date
This programming feature can be use to format the time and
date on display. Following menu is appears on the screen when
“Time & Date” is selected from the main programming menu.
•Time Display
ON/OFF
•Date Display
LN1/LN2/OFF
•Counter
FIELD/T/10/OFF
•Time Format
12/24
•Date Format
(MM/DD/YY)/(DD/MM/YY)/(YY/MM/DD)
•DST
DISABLED/USA/CANADA/AUSTRALIA/TASMANIA
•Exit
3.5 Set Time & Date
Time and Date can manually set by selecting set time and date
from the programming menu.