CNB IGP1000F - Manual (Page 5)

XNET User Manual
5 / 53
Figure 1-1 Log-in window
The default user name and password is “ root ” and “ admin ” respectively.
For security purpose, it is recommended to change the administrator’s id and
password from their default values. Please be careful not to forget them or expose
them to others. Please refer to
[1.5] for detail .
If you forget the administrator’s password, “Factory Reset” is the only way to regain
access. However, since this will retrieve all default settings, you need to configure the
network settings using IP installer software again.