CNB BE3315PVR User Manual
Weatherproof ir led, Owner's manual, Day & night color camera
OWNER'S MANUAL
Before operating the camera, confirm that you have the right
camera model and proper power voltage.
In order to help you understand this manual, we'll introduce
our model's description.
Thank you for purchasing this COLOR VIDEO CAMERA.
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorized technician.
Problem
Solutions
Nothing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not
working properly,
and the surface of
the camera is hot.
The image on the
screen flickers.
• Check that the power cord and line connection
between the camera and monitor are fixed properly.
• Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
• Is lens stained with dirt? Clean your lens with soft,
clean cloth.
• Set the monitor to proper condition.
• If the camera is exposed to too strong light, change
the camera position.
• Adjust the lens' focus properly.
• Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/ Hi-z
properly. (refer to page 12)
• Adjust DC Level, VR Level properly. (refer to page 9)
• Check that you have properly connected the camera
to an appropriate power source.
(refer to page 11)
• Is the camera facing to direct sunlight or fluoresent
lighting? Change the camera position.
Precautions
Composition
Features
Name and Function of Each Parts
Installation
Specifications
Troubleshooting
1.
2.
3.
4.
5.
6.
7.
5
6
7
8
11
13
14
CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Explanation of two Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of un-insulated
"dangerous voltage" within the product's
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance-(servicing) instructions in the
THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE
ON THE BOTTOM OF THE SYSTEM.
"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THE UNIT TO RAIN OR MOISTURE"
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
literature accompanying the appliance.
3
COLOR VIDEO CAMERA
2
Weatherproof IR LED
5
COLOR VIDEO CAMERA
4
Weatherproof IR LED
7
COLOR VIDEO CAMERA
6
Weatherproof IR LED
11
10
Weatherproof IR LED
13
COLOR VIDEO CAMERA
COLOR VIDEO CAMERA
12
Weatherproof IR LED
15
COLOR VIDEO CAMERA
14
Weatherproof IR LED
9
COLOR VIDEO CAMERA
8
Weatherproof IR LED
Super High Resolution
Model
Signal System
CCD Pick-up Element
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Resolution
Sensitivity
Lens
White Balance
Auto Gain Control
Back Light Compensation
Flickerless
Operating Temperature
Storage Temperature
Power Consumption
(Option: DC12V)
Dimensions (WxHxD)
Weight
NTSC PAL
2:1 Interalce Transfer 1/3 Inch Super HAD CCD
768(H) x 494(V) 752(H) x 582(V)
Composite: 1.0V p-p, 75Ω
Internal Sync
48dB Min. (AGC OFF)
550 TV lines
0.3 Lux (Color) / 0 Lux (IR LED On)
DC Iris Vari-focal Lens (f=3.8~9.5mm F1.2)
Auto (AWB)
On / Off Selectable
On / Off Selectable
On / Off Selectable
-10℃~+50℃
-20℃~+65℃
AC 24V(20V~28V) or DC 12V(11V~15V), Max. 11W / 1.4A
ADAPTOR : DC 12V, 1.0A (Max)
83(Ø) x 160.4(H)mm
Approx. 1.2kg
COLOR VIDEO CAMERA
with DAY & NIGHT and IR LEDs
INFORMATION
This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at their own expense.
WARNING
The manufacturer could void the user's authority to operate the
equipment.
CAUTION - To prevent electric shock and risk of fire hazards:
Do NOT use power sources except for that specified.
This installation should be made by a qualified service person
and should abide to all local codes.
P/N : 3810-0101B
(Ver.0708E)
Color Video Camera Series
Day & Night IR Camera Series
Design and specifications
are subject to
change without notice.
ICR
ICR
Weatherproof IR LED
Day & Night Color Camera
Weatherproof IR LED
Day & Night Color Camera
True Day & Night
•
S
u
p
e
r
H
ig
h
R
es
olu
tio
n
•C
ab
le
P
as
s M
ou
nt
s
•
Tr
u
e
D
a
y
&
N
ig
ht
(
IC
R)
550
TVL
3. Fan / Heater
Depends on internal temperature, it operates automatically.
- Fan ON : over 45°C
- Heater ON : under 10°C
1. Super High Resolution
The horizontal resolution of 550 TV lines can be achieved by
using a high density CCD, which provides clean, noiseless
and reliable pictures.
2. IR LED
Determines whether IR LED light will be on/off at night, for use of
external IR LED lamp when Day & Night mode is on
- D/N ON : uses built-in IR LED in night state.
- D/N OFF : dose not use built-in IR LED night state.
3. Features
6. Specifications
2. Composition
. Dimensions(mm)
7. Troubleshooting
. Contents
. User Information
② DC LEVEL Adjustment V.R
Used to adjust video output level of DC driven auto iris lens or
ELC mode. When the brightness control of the monitor does not
operate correctly.
③ VIDEO OUT Connector: Use for installation and service.
① Function Selection Switch
BLC (Back Light Compensation): This feature would be useful when camera
is facing an object that has excessive light behind it. BLC prevents the center
of object from too much darkness. E.g.: Video camera in the store facing the
entrance doors.
AGC (Automatic Gain Control): With AGC ON, the setting, camera's sensitivity
is automatically increased when the level of ambient light drops. AGC function
automatically controls signal gain in the range of maximum 28dB.
ALC / ELC: This parameter is used for the adjustment of the lens iris.
ALC mode is for an auto iris lens and ELC mode is for a fixed or manual iris lens.
The default value is ALC mode. (ELC mode is not used for this product.)
FL (Flickerless):
If the camera is used with 50Hz fluorescent lighting,
there maybe flicker on the screen. In this case, FL switch should be set
to ON position. But, FL switch should be set to OFF position if 60Hz
power source is used.
Weatherproof IR LED Camera
Sunvisor
Bracket
D
.Z
FL
K
DS
S
BL
C
D/N
AG
C
OF
F
OF
F
O
N
OF
F
O
N
O
N
O
N
O
N
OF
F
O
N
OF
F
OF
F
P
/N : 3310-0100A
Cable the VIDEO out to the monitor video in jack.
Weatherproof
IR LED Camera
Monitor
Intermediate
Video Receiver
End monitor
As the connecting method varies with the instruments, refer to the
manual supplied with the instrument.
Connect the cable after power is turned off.
Set the 75Ω/ Hi-Z selection switch as shown below if you have an
intermediate device.
Weatherproof
IR LED Camera
Connecting to Monitor
For Video Output Model
D
.Z
FL
K
DS
S
BL
C
D/N
AG
C
OF
F
OF
F
O
N
OF
F
O
N
O
N
O
N
O
N
OF
F
O
N
OF
F
OF
F
P
/N : 3310-0100A
#3
#4
L-Wrench
L-Torx Wrench
Service Monitor Cable
Owner's Manual
AC PLUG
AC Adaptor (Option)
BNC Cable
4. Name and Function of Each Parts
① Fixing Bolt for Sunvisor: You can unfasten the bolt in order to
fix mounting bracket above.
② Photo Sensor
③ IR LED (Infrared LED): Automatically controlled according to
light condition.
⑥ Mounting Bracket Fixing Bolt
(Wrench Bolt: rear- 2EA
& bracket- 3EA)
⑦ Front body
⑧ Main body
⑨ Rear Body
⑩ Bracket
⑪ Safety Cover
⑫ Wall Mount Bracket
④ Sunvisor: To reduce direct sunlight and
protect the camera unit from rain
or snow outdoor.
⑤ Function Selection
Fix the camera main body to
bracket by wrench bolt.
D
.Z
FL
K
DS
S
BL
C
D/N
AG
C
OF
F
OF
F
O
N
OF
F
O
N
O
N
O
N
O
N
OF
F
O
N
OF
F
OF
F
P
/N : 3310-0100A
①
④
⑤
⑫
⑩
③
②
⑥
⑦
⑧
⑨
⑪
Safety Cover
OWNER'S MANUAL
COLOR VIDEO CAMERA
with DAY & NIGHT and IR LEDs
ICR
ICR
Weatherproof IR LED
Day & Night Color Camera
Weatherproof IR LED
Day & Night Color Camera
True Day & Night
•
S
up
er
H
ig
h R
eso
lu
tio
n
•
Ca
bl
e
Pas
s
M
ou
nt
s
•
Tr
ue
D
ay
&
N
ig
h t
( I
C R
)
550 TVL
Connecting to Power Supply
5. Installation
- The wire is non-polarized.
- Use AC 24V power source or DC 12V power source.
- The wire is polarized.
- Use DC 12V power source.
For AC 24V / DC 12V Power Type
For DC 12V Power Type
Line Color
No.
Function
#1
RED
DC12V/AC24V(H)
ORANGE
GND/AC24V(N)
#3
BLACK
GND(VIDEO)
YELLOW
VIDEO OUT
#5
#2
#4
#6
GREEN
Not Used
BROWN
Not Used
#1
#2
#3
#4
#5
#6
① External
Focus Adjustment
F
N
T
W
②
①
External Lens Adjustment of Zoom and Focus
The lens control grooves are exposed for easy focus & zoom adjustment.
F
N
T
W
Focusing on
a far subject.
Focusing on
a near subject.
② External
Zoom Adjustment
Zoom in from
the subject.
Zoom out from
the subject.
Safety Cover is provied for concealing the grooves
to protect your settings.
Do use the camera under conditions where temperatures are within
-10°C to 50°C. Especially be careful for ventilation under high temperature.
(with heater : -30°C ~ 50°C)
Do not install the camera in extreme temperature conditions.
Do not install or use the camera in an environment where the
humidity is high.
It can cause the image quality to be poor.
Do not install the camera under unstable lighting conditions.
Severe lighting change or flicker can cause the camera to work improperly.
Never use the camera close to a gas or oil leak.
It can cause malfunctions to occur.
Do not disassemble the camera.
There are no user-serviceable parts inside it.
It can cause malfunctions to occur.
Do not drop the camera or subject them to physical shocks.
Never keep the camera face to strong light directly.
It can damage CCD.
Note
When this camera is installed near wireless communication
devices that emits strong electromagnetic field, irregularity
such as noise on the monitor may appear.
1. Precautions
VI
DE
O
SW1
BRIGH
EL
C
BL
C
ON
ON
BL
C O
FF
AL
C
EL
C
OF
F
AG
C
ON
ON
FL
O
FF
P
/N : 3310-0100B
②
①
③