Comprehensive CSC-650 - Manual (Page 8)

6
5.1 Connecting the Contact Closure Remote Control PINs
The contact closure remote control pins operate in a similar way to the Input
selector button. Using the contact closure remote control you can select the
HDMI, the COMP or the UXGA input. To do so, temporarily connect the
required input 1 pin on the REMOTE terminal block connector to the GND
(Ground) pin, as Figure 3 illustrates.
DO NOT Connect more than one PIN to the GND PIN at the same time
To select HDMI,
temporarily short
the HDMI PIN to
the GND PIN
To select COMP,
temporarily short
the COMP PIN to
the GND PIN
To select UXGA,
temporarily short
the UXGA PIN to
the GND PIN
Figure 3: Connecting the Contact Contact Remote Control PINs
1 HDMI, COMP or UXGA