Comprehensive CVG-724xl - Manual (Page 7)

3
Has two HD15F outputs, that can be used as graphics, or HDTV 1 outputs
Incorporates full ProcAmp 2 for video correction and enhancement
Offers high quality de-interlacing 3:2/2:2 pulldown 3
Can provide non-linear scaling for 4:3, 16:9 transformation 4
Supports firmware upgrade via RS-232
Includes non-volatile memory that retains the last setting, after switching the
power off and then on again
Includes a built-in Picture-in-Picture (PIP) inserter (not available on the
CVG-719xl)
Control your Presentation Switcher / Scaler:
From the front panel buttons
Remotely from the infra-red remote control transmitter
Remotely via RS-232
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise- levels
(often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position your
CVG-719xl / CVG -720xl / CVG -724xl away from moisture, excessive
sunlight and dust
4 Your Presentation Switcher / Scaler
This section defines each of the Presentation Switcher / Scaler machines:
Figure 1 and Figure 2 illustrate the CVG-719xl Presentation Switcher / Scaler
Figure 3 and Figure 4 illustrate the CVG-720xl Presentation Switcher / Scaler
Figure 5 and Figure 6 illustrate the CVG-724xl Presentation Switcher / Scaler
Table 1 and Table 2 define the Presentation Switcher / Scaler machines 5 .
1 For CVG-724xl
2 Processing amplification enables adjustment of different video and audio signal parameters
3 Accommodates the frame-rate of a converted movie (24 frames per second) to video frequencies (25 frames per second
(PAL); 30 frames per second (NTSC)
4 See section 8.4.1
5 Some items, which appear in the table, do not appear in the illustrations since they are not included in that specific machine