Comprehensive CSW-HDMI410 - Manual (Page 8)

8
provided. In the case of the remote, there are separate buttons for the power and
input sources. Point the remote control at the unit and press the power button to
turn the switcher on or off. Press the appropriate input select button to cause the
desired input to appear on the switcher’s output.
5.1 OPERATION USING THE OPTIONAL EXTENDED IR MODULE
An optional IR extender accessory is available for those situations requiring the
switcher to be mounted in a location where direct line-of-sight is not available. If
you have purchased the optional IR extension module, connect it to the rear of
the unit and position the module in a manner that allows the furnished remote to
be pointed at it without any obstructions between the remote and the extended IR
module. The Module is shipped with a 6 foot interconnect cable. Longer length
cables are available up to 50 Feet.
Operation using the extended IR module accessory is the same as with the
standard IR remote capability.
6.0 INSTALLATION
OF MOUNTING COMPONENTS
The CSW-HDMI210 and CSW-HDMI410 switchers can be mounted on any flat
surface.
Mounting the CSW-HDMI210 or CSW-HDMI410 Switchers
Attach the two “L” shaped mounting brackets to the product using the furnished
hardware and then attach the combined assembly to the desired location.
Note that the holes on the brackets are offset to allow easier mounting to the flat
surface after you’ve attached the brackets to the switcher.
Top View
Front View