Comprehensive CSW-HD880 - Manual (Page 15)

HDMI Matrix Switcher
15
Resolution
Range
Up to 1920 x 1200 or
1080P@60Hz
Switching Speed 2 – 5 seconds
Consumer
Electronics
Control (CEC)
Supports CEC wired infrared data pass-through using the HDMI 1.3 standard
EDID and DDC
Management
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data
using DVI and HDMI standards, EDID and DDC signals are actively buffered. The built-in
EDID/DDC database can analyze these two signals, mix them, and realize the handshake of
them internally.
HDCP
Management
Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3
standards. The built-in HDCP management technology can analyze HDCP key, and realize
the handshake internally.
Audio General
Digital Audio Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered
Control Parts
Serial Control
Port
RS-232, 9-pin female D
connector
Pin Configurations 2 = TX, 3 = RX, 5 = GND
IR Remote Default IR remote Front Panel Control Buttons
Options TCP/IP control by PTNET(PTN's programmable interface)
General
Power Supply 100VAC ~ 240VAC, 50/60Hz Power Consumption 40W
Temperature -20 ~ +70
℃
Humidity 10% ~ 90%
Case
Dimension
W483 x H175 x D320mm
(2U high, full rack wide)
Product Weight 8.7Kg
10. Troubleshooting & Maintenance
1) When the output image in the destination device connected to theHDMI Matrix (MHD) has ghost,
such as the projector output with ghost, please check the projector’s setting or try another high
quality connection cord.
2) When there is a color losing or no video signal output,
，Maybe the HDMI cables haven’t been
connected asHDMI criterion
3) When the remote controller doesn’t works:
A. Maybe the battery is run out of, please change a new one.
B. Maybe the controller is broken, please ask the dealer to fix it.
4) When user can not control the HDMI Matrix (MHD) by computer through its COM port, please