Conveyor Technologies CW-AOI-1.2M-2/1 - Manual

- 1.2 Meters
- 1 Operator/1 Side (Fixed Rail Side)
- Single Level Conveyor for Good PCB's from AOI
- Exit Section lift for Failed PCB's waiting to be inspected / repaired
- Once Failed PCB has been repaired, the Products will be lowered and released
on the lower level.
- Bottom Lane is Pass Through for Good Product
- Top Lane is Inspection/Rework Area
- Dual sections on the pass through level.
- E-Stop at Workstation Position
- Operator Modesty Panel
- Oval Work Surface (Antistatic work surface)
- Adjustable Rail Rear Shelf
- Swivel Monitor Mount with Keyboard Holder on right side of the light uprights
- PC Shelf mounted on the bottom left of the uprights
- Light Tower
- Overhead Work Light
- Ground Plug for Operator
- PLC Controls with SMEMA Cables
- Power Strip for Soldering Iron, etc.
- Adjustable Footrest
STANDARD FEATURES:
PN:
CW-AOI-1.2M
SPECIFICATIONS:
• PCB Size: ................................... Min. 2” X 4”
.................................................. Max.16” X 18”
• PCB Height:................................ 37.5” + - 2”
• Edge Clearance:.... . 3mm from edge of PCB
• Air Requirements:............... .1 cfm @ 60 PSI
• Power Requirements: ..... 5 amps @ 110VAC
• Capacity:…………………....1 Failed / 2 Pass
POST AOI WORKSTATION
Options:
• Pass Fail Signal to Downstream Machine
• Automatic Width Adjust
• X Wide Product Capability
• Capable of adding a Bar Code Reader
CUSTOMER SATISFACTION……. “Whatever it takes”