American Dryer Corp. AD-758DV - Manual (Page 48)

44 JLA Limited 113372-7
2. Water Connections:
The water connection is made to the 3/4” M.P.T.
bushing, located at the rear upper left area of the
dryer (refer to photograph). The water solenoid
valve has a 3/8” M.P.T. connection and a 3/4”
bushing is supplied to provide the minimum 1/2”
supply (feed) line. Flexible supply line/coupling
must be used in effort to avoid damage to electric
water solenoid valve.
IMPORTANT: Flexible supply line/coupling must be used. Solenoid valve failure due to hard
plumbing connections WILL VOID WARRANTY. It is recommended that a filter
or strainer be installed in the water supply line.
Typical water supply...