CTI Products PCLTA PCI Interface User Manual
Page 16
PCLTA Installation Manual
PCLTA Initialization & Testing
CTI Products, Inc.
68-11199-135
12
c.
After reviewing the Software Licensce Agreement information, click
“Yes” to continue.
d.
When prompted for the destination folder, select “Next” if the default
directory of c:\lonworks is suitable for the PC. Otherwise, select
“Browse” to specify a different directory.
e.
(This step applies to Windows 95/98 only.)
When the 16-bit Application Support prompt appears, select “Yes” to
enable the use of the 16-bit MCNRCD software with the PCLTA. This
causes the installation program to add references to the DOS config.sys
file for the “stub” device drivers named PCLON1 and PCLON2 as
follows:
device=c:\lonworks\bin\ldvstub.sys /d:pcclon1
device=c:\lonworks\bin\ldvstub.sys /d:pcclon2
f.
When the DOS Virtual-Mode Device Driver prompt appears, select “Yes”
to allow DOS applications to be used in a Windows DOS shell/window.
For Windows 95/98, this causes the installation program to add the
following reference to the DOS config.sys file:
DEVICE=C:\lonworks\bin\LDVVDD.SYS /D1