CTI Products AIB AstroTAC Interface User Manual
Page 14
AIB Hardware Reference
Connectors
CTI Products, Inc.
68-10842-115
9
AIB HOST
Connector
DE9-female
Signal Name
Cable
Connector
DE9-male
Direction
Cable Connector
DB25-male
ASTRO-TAC™
Comparator
J15
DB25-female
Signal Name
RXD
2
<
2
TxD3
TXD
3
>
3
RxD3
CTS
7
<
4
RTS3
RTS
8
>
5
CTS3
DTR
1
>
6, 8
DSR3, DCD3
Ground
5
7
Signal Ground
RCLK
9
>
15
TCLK3
TCLK
6
>
17
RCLK3
DCD
4
<
20
DTR3
Chassis Gnd
shell
1
Shield Gnd
Table 7 - AIB <--> Comparator Communication Cable
The HOST connector (9 pin D-SUB female) on the rear of the AIB is used to
connect the module to connector J15 (25 pin D-SUB female) on the back of the
ASTRO-TAC™ Comparator. This port is a synchronous RS-232 port operating
at 9600 baud. Table 7 gives the pinout of the AIB to ASTRO-TAC™ Comparator
communications cable.
This cable is available as an accessory to the AIB. The part number for ordering
this cable is S2-60440.