CTI Products OTAL On-the Air Terminal Board and Lamp - Manual (Page 6)

CTI Products, Inc. OTAL Terminal Board User Guide
I NSTALLATION
Mounting Plate & Cover Installation
Figure 2 OTAL TB Mounting Plate & Cover Kit
The Mounting Plate & Cover Kit includes the following items:
(1) Mounting Plate
(2) Hex Threaded Standoffs
(1) Plastic Cover
(2) 6-32 x ¼" Philips Head screws
If you ordered multiple kits, they will be bulk-packed.
To install the OTAL Terminal Board, Mounting Plate & Cover Kit:
1. Install OTAL Terminal Board over the threaded studs on the Mounting Plate
2. Install spacers on the exposed studs
3. Connect the wires to the terminal board & strain relieve with a tie-wrap.
4. Install the cover over the board using the screws provided. Be sure not to pinch any wires.
5. Mount the assembly to the mounting surface. Mounting holes will pass a #6 screw.
Terminal Board 6