CTI Products NCB/FL with Fiber Interface - Manual

Network Combiner NCB/FL
Connectivity for Fiber Optic Networks
Features
• LonWorks® Router for Fiber Optic
Cable
• Point-to Point or Point-to-Multipoint
• Compatible with Ethernet 10BASE-FL
TCP/IP networks
• Connect multiple LonWorks     networks
into a unified network using Fiber
backbone
• Supports Unicast, Unicast-Replicated,
and Multicast IP Addressing modes
• L ON W ORKS Router technology
• Full L ON W ORKS system
interoperability is maintained.
• Supports all L ON T ALK
 protocol
message services.
• Configured with standard L ON W ORKS
network management tools.
• Subnet and group segmentation can
be used to maximize network
performance.
• Fully Interoperable Peer-to-Peer
Connectivity Via Ethernet Fiber
Backbone
• Any node can communicate with any
other node, regardless of the location
of each.
• No complex custom software to write,
debug, or maintain.
• No system node application code
changes needed.
• Fiber Media Support:
• Multimode Fiber (up to 2 km)
• Single Mode Fiber (up to 14 km)
• Supports standard L ON W ORKS
transceivers:
• FTT10A, TP/XF78 & 1250, LPT-10
• SMX transceivers including power line
and RS485.
• Typical Applications:
• Building Automation
• HVAC
• Utilities
• Security
• Industrial
• Remote Monitoring/Control
• Remote Diagnostics
NCB-Fiberlon 
Network
Combiner
CTI Products, Inc.
1211 West Sharon Road
Cincinnati, Ohio 45240
USA
phone
+1.513.595.5900
fax
+1.513.595.5983
e-mail
[email protected]
www.ctiproducts.com