Controlled Products Systems Group RK65K - Manual (Page 27)

(User ID Number 12) (ADD) (ENTER) (ID Number 995) (THRU)
Add a Transponder by Entering the Transponder ID:
Instead of presenting the transponder, you can also use the
Programmer to enter the Transponder ID number: Put the
unit into the Program mode (See Page 8). Press ADD then
press the sequence of digits representing the desired User ID
Number (1 - 100). Press THRU. Press the sequence of digits
representing the ID number printed on the Transponder, then
press ENTER. For example, to program a Transponder ID
Number 995 into User ID Number 12, the following sequence
would be followed;
+ 1 + 2 + + 9 + 9 + 5 +
Record the User ID Number and Transponder ID Number in
the User Log Form.
NOTE: If you assign a new transponder to a User ID Number where
another transponder was already assigned, the new transponder
will replace the old transponder for that User ID Number.
Add a Series of Transponders to the System:
Put the unit into the Program mode (See Page 8). Press ADD,
then press the sequence of digits representing the desired
Secura Key 24
Radio Key ® RK-65K Operating Guide