Telephone programming, Call forward programming, Programming – Chamberlain TAC1 User Manual
Page 15
15
ENABLE TELCO MODE
Enter the command tone:
0
7
PROGRAMMING
>> FROM THE TELEPHONE
ENABLE INTERCOM MODE
Enter the command tone:
0
3
ADJUST “PICK UP” RING COUNT
1. Enter the command tone:
1
0
2. Enter the ring count:
2
through
5
ENABLE ALTERNATE DTMF PROGRAMMING
This feature changes the first programming digit from
to
#
Enter the command tone:
1
3
DISABLE ALTERNATE DTMF PROGRAMMING
Enter the command tone:
#
1
6
ENABLE STANDARD (LONG) RING TONE
Enter the command tone:
1
4
ENABLE ALTERNATE (DUAL) RING TONE (DEFAULT)
Enter the command tone:
1
5
NOTE: Alternate ring tone function may not work with
all phones.
ERASE THE CALL FORWARDING NUMBER
Enter the command tone:
#
8
NOTE: This command will also disable the call
forwarding mode.
ENABLE CALL FORWARDING
Enter the command tone:
0
1
DISABLE CALL FORWARDING
Enter the command tone:
0
2
VERIFY CALL FORWARDING NUMBER (VIA CALLER ID)
Enter the command tone:
0
6
Hang up the phone - Wait for the ring.
TELEPHONE PROGRAMMING
CALL FORWARD PROGRAMMING
Up to a 14 Digit Telco Number
ENTER CALL FORWARDING TELEPHONE NUMBER
Enter the command tone:
#
#