Chamberlain TAC1 - Manual (Page 8)

8
Primary Gate Operator
(Strike Open Input) COM
(Common)
NO
(Normally Open)
NOTE: For DC power
install a 1N4001 diode
or equivalent.
NOTE: For AC power install a
Siemens S10K30 MOV
(Metal Oxide Varistor) or equivalent.
AC or DC
Power
COM (Common)
NO (Normally Open)
NOTE: Do not use
the unit’s power supply
for the door strike.
Door Strike
RELAY 1 RELAY 2
WIRING A GATE OPERATOR (NORMALLY OPEN) &
A DOOR STRIKE LOCK (NORMALLY OPEN)
WIRING A GATE OPERATOR (NORMALLY OPEN) &
A MAGLOCK (NORMALLY CLOSED)
The door strike can be connected to Relay 1 or Relay 2. See the
Programming section for information about configuring Relays 1
and 2.
AU TOC
AL L
EXI
T 2
COM EXI
T 1
HOUSE TELCO
Notes about wire connectors
(terminal blocks):
• Wire connectors can be
removed to simplify wiring.
• DO NOT overload wire
connectors. Use ONLY one
wire per hole.
INSTALLATION
>> WIRING A GATE OPERATOR (NORMALLY OPEN) A DOOR STRIKE LOCK
(NORMALLY OPEN) AND WIRING A GATE OPERATOR (NORMALLY
OPEN) & A MAGLOCK (NORMALLY CLOSED)
NOTE: Install a 1N4001
diode or equivalent.
NOTE: Do not use
the unit’s power
supply for the maglock.
DC Power
Maglock
Primary Gate Operator
(Strike Open Input)
COM
(Common)
NO
(Normally Open)
RELAY 1 RELAY 2
COM (Common)
NC (Normally Closed)
The maglock can be connected to Relay 1 or Relay 2. See the
Programming section for information about configuring Relays 1
and 2.