Controlled Products Systems Group LA412 - Manual (Page 8)

Mo vin g Gate Ca n C aus e
Inju ry or De ath
KEEP CLEAR! Gate may move at a ny
time wi tho ut prior wa rnin g.
Do no t le t ch ildr en o per ate the ga te or
play in t he g ate area.
This ent ranc e is for veh icles only
Pede str ians mu st us e s eparate en trance
12
gauge
wire
8 ft.
(2.4 m)
To prevent SERIOUS INJURY or DEATH; one or more
non-contact sensors shall be located where the risk of
entrapment or obstruction exists.
OVERVIEW OF TYPICAL INSTALLATION
Outside Property
Inside Property
Direction of
Gate ravel
T
12
gauge
wire
8 ft.
(2.4 m)
LEFT-HAND GATE
Warning Sign
Solar Panel
(Facing South)
Control Box
with Batteries
Antenna
PVC Conduit (not
provided) to
protect the power
cable for solar and
low voltage wire
from lawn mowers
and string
trimmers.
Hinge
Earth Ground
Installation
(Optional)
Safety
Sensors
Operator Cable
Operator
Gate
Bracket
Post Bracket
NOTE: One or more non-contact sensors shall
be located where the risk of entrapment or
obstruction exists at either the opening or
closing direction. Care shall be exercised to
reduce the risk of nuisance tripping, such as
when a vehicle, trips the sensor while the gate
is still moving.
Warning
Sign
Hinge
Antenna
Solar Panel
(Facing South)
Control Box
with Batteries
Post
Bracket
Gate
Bracket
Operator
Operator Cable
Safety Sensors PVC Conduit (not provided)
to protect the power cable
for solar and low voltage wire
from lawn mowers and string
trimmers.
Earth Ground
Installation
(Optional)
Preparation and Overview 8