Impulse SBC-210 - Manual

The specification is subject to change without notice. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.
Industrial Motherboards
Specifications
3.5" SBC Motherboard
SBC-210
• Intel ® Atom TM Baytrail-M/D Processor
• Integrated Intel ® Gen7 Intel Graphics DX 11, OGL3.2
• Supports Single Channel DDR3L 1333MHz, 1 x SO-DIMM,
up to 8GB system memory
•
1 x COM (RS-232/422/485), 3 x COM (RS-232)
• 1 x HDMI, 1 x D-Sub, 1 x Dual Channel 24-bit LVDS
• 2 x USB 3.0, 6 x USB 2.0, 2 x SATA2
• 1 x mini-PCIe, 1x mSATA (shared)
• Gigabit LAN : 2 x Realtek Lan
• 1 x TPM Header
• 9~36 V DC-in
Spotlight Features
Processor System
Dimension
CPU
Core Number
Max Speed
L3 Cache
Chipset
BIOS
3.5" SBC (5.8-in x 4.0-in)/ ( 148 x 102 mm)
Intel ® new Atom TM Baytrail-M/D
Supports Hyper-Threading Technology
4
(By CPU)
2MB
N/A
UEFI
Graphics
Controller
VRAM
VGA
LVDS
HDMI
DVI
Display Port
Multi Display Intel ® Gen7 Intel Graphics DX 11*, OGL3.2
Shared Memory
Supports max. resolution 1920 x 1200
Dual channel 24-bit, max resolution 1920 x 1200@60Hz
Supports HDMI 1.4a, max resolution 1920x1200
No
No
Yes (Dual Display)
Expansion Slot
PCI
Mini-PCIe
mSATA
PCIe
CFast Card Socket 0
1 (Half Size) + 1 (Full Size ) shared with mSATA
1 (Full Size ) shared with SATA2
0
0
Memory
Technology
Max.
Socket Single Channel DDR3L 1333 MHz SDRAM
8GB
1 x SO-DIMM
Ethernet
Interface
Controller
Connector 10/100/1000 Mbps
GbE LAN: Realtek RTL8111G-CG
2 x RJ-45
SATA
Max Data Transfer Rate SATA2 (3.0Gb/s)
Rear I/O
VGA
HDMI
DVI-I/D
Display Port
Ethernet
USB
Audio
Serial
PS/2 1
1
0
0
2
2 x USB 3.0 compliant
1 ( Line out)
0
0
Internal Connector
USB
LVDS/Inverter
VGA
Serial
SATA
m-SATA
Mini-PCIe
Parallel
IrDA
GPIO
SATA PWR Output Con
Speaker Header 6 ( 3*2.54 pitch header USB 2.0 compliant)
1/1
0
4 (RS-232)
2x SATA2 ( 3.0Gb/s)
1 (shared)
1
0
0
4 x GPI + 4 x GPO
1
1
Watchdog Timer
Output
Interval From Super I/O to drag RESETCON#
256 segments, 0,1,2…255sec/min
Power Requirements
Input PWR
Power On 9-36V DC-In using 4-pin ATX PWR Con
AT/ATX Supported
AT : Directly PWR on as Power input ready
ATX: Press Button to PWR on after Power input ready
Environment
Operating Temperature 0ºC – 60ºC