American Dryer Corp. ML-78III - Manual (Page 10)

6
Gas
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Shaded areas are stated in metric equivalents 9/23/03
* For non-reversing models only.
** A minimum of 3/4” pipe must be supplied to the gas inlet for each dryer.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
MAXIMUM CAPACITY (DRY WEIGHT) 75 lbs 34 kg
BASKET (TUMBLER) DIAMETER 44-1/2” 113.03 cm
BASKET (TUMBLER) DEPTH 24-7/8” 63.18 cm
BASKET (TUMBLER) VOLUME 22.4 cu ft 0.634 cu m
BASKET (TUMBLER) MOTOR 1 hp* 0.746 kW
DOOR OPENING (DIAMETER) 31-3/8” 79.7 cm
F.S.S
.
WATER CONNECTION 3/4-11.5 NH
DRYERS PER 20’/40’ CONTAINER 8/18
DRYERS PER 48’/53’ TRUCK 24/26
VOLTAGE AVAILABLE 120-480v 1, 3Ø 50/60 Hz
APPROX. NET WEIGHT 888 lbs 402.8 kg
APPROX. SHIPPING WEIGHT 938 lbs 425.5 kg
HEAT INPUT 204,000 Btu/hr 51,408 kcal/hr
AIRFLOW 1,200 cfm 33.98 cmm
INLET PIPE CONNECTION 3/4” F.N.P.T.**