Atek electronic Secure Password Organizer LG10B - Manual (Page 10)

Logio User’s Manual, page 
After several seconds, the screen will display:
Push one time.
4. Set up master passcode
THIS SECTION IS VERY IMPORTANT. MAKE SURE YOU HAVE READ IT COMPLETELY
BEFORE PROCEEDING.
The screen will display:
Push one time. The screen will display:
Starting at the blinking cursor on line 3, you will enter a random 8 to 15 digit master
passcode.
The master passcode consists of numbers only, so the alphanumeric character
buttons on the Logio keypad input numbers only (not letters) when setting up and
entering master passcodes. Therefore push alphanumeric buttons only one time to
input numbers for the master passcode.
WARNING:
You will need to enter your master passcode every time you want to access your
Logio, so you must not forget it. If you forget your master passcode, there is no
way to reset the passcode or the Logio, and there is no way to retrieve your user
IDs and passwords. A master passcode can be changed later, but only if you are
already logged into Logio with the current master passcode.
Although a minimum of 8 digits are required, the more digits you use, up to the
Initial Setup