Asus 1U Rackmount Barebone Server RS120-E3 (PA4) - Manual (Page 133)

A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 6 - 2 7 6 - 2 7 6 - 2 7 6 - 2 7 6 - 2 7
Using the Objects command Using the Objects command Using the Objects command Using the Objects command Using the Objects command
To check data consistency using the O b j e c t s O b j e c t s O b j e c t s O b j e c t s O b j e c t s command:
1. From the Management Menu, select Objects Objects Objects Objects Objects, then select Logical Drive Logical Drive Logical Drive Logical Drive Logical Drive
from the menu.
2. Use the arrow keys to select the logical drive you want to check, then
press <Enter>.
3. Select Check Consistency Check Consistency Check Consistency Check Consistency Check Consistency from the pop-up menu, then press <Enter>.
4. When prompted, press <Y> to to check the drive.
5. When checking is complete, press any key to continue.