L-com HA2401-G11FNFPC - Manual (Page 3)

Any changes or modifications of equipment not expressly approved by the
manufacturer could void the user’s authority to operate the equipment and
the company’s warranty.
NOTE: Certain high gain antennas are intended for point-to-point or point-
to-multipoint applications only. These antennas are clearly identified in the
table contained in this manual. Note that +36 dBi may only be exceeded for
point-to-point applications as given in 15.247(b). It is the installers
responsibility that when using these antennas to ensure that the system is
used exclusively for point-to-point operations, and that the antenna may
not be co-located with other intentional radiators transmitting the same
information". The device and its antenna and must not be co-located or
operating in conjunction with any other antenna or transmitter.
The table contained in this manual identifies which antennas are
considered “fixed” and which are “mobile”. When this device is installed as
a fixed-mount application there is a minimum required separation distance
of one hundred (100) cm between the antenna and all persons during normal
operation. All mobile antennas must be mounted at a minimum distance of
20 cm from users.