L-com HG2408P - Manual (Page 2)

IP-00013 Rev. A – 11/05 Page 2/3
MOUNTING INSTRUCTIONS
Models: RE08P, HG2408P
Horizontal Polarized
Mounting
Vertical Polarized
Mounting
This antenna can be mounted for Vertical or Horizontal polarization.
For Vertical Polarization, the cable should be exiting from either the
top or bottom of antenna.
For Horizontal Polarization, the cable should be exiting from either
right or left side of the antenna.
This antenna can be mounted flat against the wall. Its
unique design allows the cable to exit out of the side
or from the back of the unit, which is ideal for
locations that require the cable to be hidden. It will
also accept most tilt-and-swivel security camera
brackets equipped with standard 1/4-20 threads. (See
Optional Mounting Kits)
INSTALLATION TEMPLATE
(For Flat Mounting)
Drill one clearance hole
larger than connector O.D.
for cable and connector.
To hide cable when mounting,
position as shown.
2”
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.