LEADER LT416 - Manual (Page 2)

k e y s p e c i f i c a t i o n s L T 4 1 6 - C o n t
RF OUTPUT
System
NTSC: M
PAL: B, D, G, H, I, K
SECAM: B, D, G, H, K, L RF is disabled
when NTSC - 4.43 is selected
Carrier Frequency Range
VHF and UHF
Carrier Frequency
Direct setting using programmed country
channel plan
Modulation Polarity
Negative or Positive
Modulation System
Double sideband
Sound Signal
Intercarrier Frequency: 4.5, 5.5, 6.0,
6.5 MHz
Modulation Signal: 1 kHz
± 200 Hz
Output Voltage
VHF:At least 1 mV rms into 75
Ω
UHF:At least 0.5 mV rms into 75
Ω
Number of Outputs: 1 75
Ω
SOUND OUTPUT
Output Signal
1 kHz
± 100 Hz, sinewave
Amplitude
1.2 V p-p into 600
Ω
POWER REQUIREMENTS
90 to 250 V ac, 50/60 Hz, 15 W max.
PHYSICAL
Size (W x D x H)
16 3 / 4 x 3 1 / 2 x 11 3 / 4 in.
426 x 88 x 300 mm
Weight
10.1 lbs., 4.6 kg
*Only output in SECAM
Y/C OUTPUT
Same as the Composite Signal
Output Impedance / Connector
75
Ω / S type
Y, B-Y, R-Y OUTPUT*
Y Output Amplitude
Sync Signal Amplitude
NTSC/NTSC - 4.43: 286 mV p-p
± 14 mV
PAL: 300 mV p-p
± 15 mV
B-Y, R-Y Output Amplitude
525 mV p-p
± 26 mV
Output Impedance / Connector
75
Ω / BNC
R, G, B OUTPUT
Output Signal **
R, G, B, C. SYNC
R, G, B Output Amplitude
700 mV p-p
± 35 mV (NTSC, PAL,
NTSC - 4.43)
C. SYNC Output Amplitude
C-MOS Level (NTSC, PAL, SECAM,
NTSC - 4.43)
Output Impedance / Connector
75
Ω / BNC