LEADER LT450 - Manual (Page 6)

HDMI
Standards: HDMI 1.3a, HDCP 1.2
TMDS
Output Format: G,B,R/Y,PB,PR 4:4:4 8 bit and
Y,PB,PR 4:2:2 8/10/12 bit
Only RGB output is available for
SVGA, XGA, SXGA, and UXGA.
Deep Color: G,B,R/Y,PB,PR 4:4:4 10/12 bit
Supports HDMI 1.3a Primary Video
Formats
VGA (640x480@60 Hz),
720p/59.94, 1080i/59.94,
480p/59.94, 480i/59.94 (1440),
720p/50, 1080i/50, 576p/50,
576i/50 (1440)
xvYCC: Future support
Link: Single
Variable Output Levels
Video Signal: The video signal levels for G, B, R
and Y, PB, PR can be adjusted
separately.
(Linked to analog component and
DVI-I)
Variable range: 0 to 100 % (1 % unit). 100 % is the
normal level.
Audio
Internal
Format: AES/EBU
Channels: 2
Output Level: 0 dB
Frequency: Switch between OFF, 400 Hz, and
1 kHz
Sampling Frequency: 32, 44.1, 48 kHz
Number of Quantization Bits: 16 bits
External Input: SPDIF coaxial
InfoFrame: Supports AVI, SPD, and AUDIO
InfoFrames
HDCP: Includes a production key
DDC: DDC2B
Hot Plug Detection: ON/OFF selectable using the menu
CEC: Checks connection with <Give
Physical Address>
LipSync: Future support
Connector: HDMI Type A
Simple Motion Pictures
Simple Motion Pictures: Pattern scroll
Scroll Directions: Up/down and left/right
Scroll Speed Settings
Progressive: Vertical: 0 to 256 lines/frame
(1 line steps)
Horizontal: 0 to 256 dots/frame
(4-dot steps)
Interlace: Vertical: 0 to 256 lines/field
(2 line steps)
Horizontal: 0 to 256 dots/field
(4-dot steps)
External Interface
RS232C Connector
Function: Remotely control the LT 450
settings from an external PC via
RS232C.
Connector: D-sub 9-pin (male)
USB Connector (Front Panel)
Function: Remotely control the LT 450
settings from an external PC via
USB (future support).
Connector: USB (B type)
USB Connector (Rear Panel)
Function: Save and load preset data from
USB memory (future support).
Connector: USB (A type)
Ethernet
Function: Remotely control the LT 450
settings through Telnet.
Remote
Function: Increment or decrement the
recalled address through an
external contact input.
Connector: XM4K-1542-112 (by Omron)
Preset/Recall
Store and recall up to 100 panel settings (addresses 00 to 99)
Area Settings:
Set a range of consecutive
addresses to be recalled from the
100 addresses.
BEGIN: Recall start address
END: Recall end address
Startup Memory
Stores the panel settings at power-on to the internal memory
General Specifications
Environmental Conditions
Operating Temperature: 0 to 40 °C
Operating Humidity: ≤ 85 % RH (without condensation)
Spec-Guaranteed Temperature: 10 to 35 °C
Spec-Guaranteed Humidity: ≤ 85 % RH (without condensation)
Operating Environment: Indoor use
Operating Altitude: up to 2,000 m
Overvoltage Category: II
Pollution Degree: 2
Power Requirements: 90 to 250 VAC, 50/60 Hz
Power Consumption: 80 W max.
Dimensions and Weight: 426 (H) x 88 (W) x 400 (D) mm
(excluding projections)
5.8 kg
Accessories: Power cord 1
Instruction Manual 1
2-6-33 Tsunashima-Higashi, Kohoku-ku, Yokohama 223-8505, Japan PHONE: 81-45-541-2123 FAX: 81-45-541-2823
LEADER ELECTRONICS CORP.
http://www.leader.co.jp
Oct. 30, 2007 07101.5K 1 Printed in Japan
LEADER INSTRUMENTS CORP. (U.S.A.) PHONE:1-714-527-9300
LEADER INSTRUMENTS (H.K.) LTD. PHONE:852-2721-2503
LEADER ELECTRONICS CORP. BEIJING OFFICE PHONE:86-10-8511-8606/8607
LEADER INSTRUMENTS (H.K.) LTD. DONGGUAN OFFICE PHONE:86-769-83829381, 83829391
LEADER ELECTRONICS CORP. SHANGHAI OFFICE
PHONE:86-21-62756905, 62759629
LEADER ELECTRONICS EUROPEAN OFFICE PHONE:31-40-2565008
TS
SPECIFICATION CHANGES: LEADER ELECTRONICS CORP. reservers the right to discontimue the sale of instruments and/or change the specifications of
instrments at any time without responsibility for the incorporation of new features in the instrumens already sold.