Lectrosonics CR170 - Manual (Page 10)

SPECIFICATIONS AND FEATURES
Operating frequencies: 150 to 216 MHz crystal controlled
Sensitivity: 1.0uV for 20dB SINAD
2.0uV for 50dB S/N ratio
Signal/noise ratio: 95dB flat; 100dB A-weighted
Squelch quieting: greater than 100dB
AM Rejection: -40 dB (10uV to 0.1 Volts)
Modulation acceptance:
±
15kHz
Image and spurious rejection: greater than 100 dB
Audio output: Front panel mini jack; variable -40dBm to +3dBm
Antenna input: Rear panel BNC connector
Controls: Front panel output attenuator
Indicators: LED for power "ON"
2 LEDs for modulation level
"RF" LED for transmitter "ON"
Power requirements: * 9 Volt alkaline battery
* External 12 Volt source
* 110 Volt AC via CH-12 adapter
Power consumption: 35 mA (max.)
Weight: 9.5 ozs. with battery
Dimensions: 1.1 x 2.8 x 4.6 inches
9