Lectrosonics UCR110 - Manual (Page 9)

Compact Receiver
SPECIFICATIONS AND FEATURES
Operating frequencies: 537.600 MHz to 865.000 MHz
Number of frequencies: 256 per block
Channel spacing: 100 kHz, 25 kHz programmable for Europe
Frequency control: Crystal Controlled Phase Locked Loop
Sensitivity: 1 uv (20 dB SINAD)
Signal/Noise ratio: 105 dB (system)
Squelch quieting: 90 dB
AM rejection: 50 dB, 10 uv to 100 mv
Modulation acceptance: +/-20 kHz
Spurious rejection: Greater than 70 dB
Third order intercept: 0 dBm
Frequency response: 50 Hz to 18 kHz, (±2db)
Distortion: 1% max at 50% modulation (system)
Audio output: 0 dBv (1 Vrms) UNBALANCED into 600 ohms
Antenna: 1/4 wave ver tical (fixed)
Front panel controls: Single knob controls Audio Output Level
LED Indicators: Power (red), RF (green), Level (green), Limit (red)
Power requirement: Single 9V Alkaline Battery for approximately 8 hours operation.
Power consumption: 60 ma.
Weight: 7.3 oz with battery
Size: 3.6 x 2.4 x 0.8 inches (housing only, belt clip and
knob extend beyond the housing.)
Specifications subject to change without notice.
This product meets the CE Compliance Standards - ETS 300 445; January
1996. A copy of the Declaration of Conformity may be requested from your
dealer or by contacting the factory directly:
Lectrosonics, Inc.
Marketing Department
581 Laser Rd. NE, Rio Rancho, NM 87124 USA
tel: 505-892-4501 fax: 505-892-6243 e-mail: [email protected]
Rio Rancho, NM – USA 9