Frequency coordination, Frequency compatibility chart – Lectrosonics VRFIELD (Narrowband) User Manual

Page 22

Advertising
background image

VR Field

Frequency Coordination

Intermodulation interference is a problem constantly

lurking in the background, especially when working

in environments where simultaneous productions are

taking place in close proximity. In these cases, proper

frequency coordination is a must. There are basically

three methods to coordinate frequencies:
• Use the built-in frequency groups
• Scan for clear channels (See SmartTune™

and Scan Function.)

• Call Lectrosonics

Frequency Compatibility Chart

Considering that multiple systems can be used in a produc­

tion, coordinating frequencies to minimize interference

between these channels can be a daunting process.
The Frequency Compatibility Chart was designed to as­

sist in minimizing intermodulation problems for multiple

channel wireless systems. It does this by identifying

potential intermodulation problems and listing compat­

ible frequencies and frequency groups. This chart can

be used with all Digital Hybrid Wireless

™

(400 Series)

receivers.
The chart divides the frequency blocks used in the North

American market into Set 1 and Set 2, then further di­

vides each row into two groups of eight frequencies each.

These frequency groups are labeled A and B and C and

D, and correspond to the factory set frequency groups

(Groups A, B, C and D) described in the Tuning Setup

Screen.
Understanding and using the Frequency Compatibility

Chart is not as difficult as it first appears. There is a pat­

tern of compatible frequencies that becomes apparent, as

illustrated on the Frequency Compatibility Diagram on the

next page.

Frequency Compatibility Chart



LECTROSONICS, INC.

Advertising